The MS3 meter, combined with one of our MS2 sensors, makes a versatile magnetic susceptibility system. The wide range of sensors is designed to match a variety of sample types, including soils, rocks, powders and liquids, and is suitable for laboratory and field use.
Features
- Wide range of laboratory, field and downhole sensors
- Sensors fully interchangeable with no adjustment required
- Resolution to 2×10-6 SI
- Range 0.1 SI (MS2) or 26 SI (MS3)
- Measurement period down to 0.1s (MS3)
Applications
- Palaeomagnetics
- Archaeological prospecting and forensics
- Palaeoclimatic studies
- Sedimentology
- Soil and airborne pollution surveys
- Analysis of ferrites and magnetic inks
- Study of micro/nano magnetic particles and fluids
- Quality assurance
This system is for use with our Helmholtz Coils (HC1, HC2, and HC16). It is also compatible with Ferronato™ Coils. It includes the PA1 Power Amplifier, CU1 Control Unit, and CU2 Closed-Loop Module.
Features
- PA1 Power Amplifier provides power and offers DC offset compensation
- CU1 interfaces the PA1 to a National Instruments™ acquisition card
- CU2 provides closed-loop control for cancellation of DC and AC field variations
- Option of 1, 2 or 3 axes for HC1®
- Mounting table available
- HC2® coils provided in flat-pack assembly to facilitate freight and installation
Applications
- Calibration of three-axis magnetic field sensors
- Creation of a known magnetic environment
The Mag-01H Declinometer/Inclinometer system provides fast, accurate and convenient measurements of the declination and inclination of the geomagnetic field.
Features
- Measures localised magnetic field declination and inclination to 6 seconds of arc
- Non-magnetic theodolite
- 20 hours continuous use on internal battery
Applications
- Earth’s magnetic field Measurement
- Calibration tool for compasses and rangefinders
- In field referencing in oil and gas exploration
- Magnetic cleanliness of sites such as aircraft compass calibration pads
This portable, high performance instrument provides precision measurements, in one axis, of the intensity of static and slowly varying magnetic fields from 0.1nT to 2mT (1mT = 10G). Axial, transverse and cryogenic probes are available.
Features
- Axial, transverse and cryogenic probes
- Resolution to 0.1nT
- Measuring range from ±0.1nT to ±2mT
- Offset removal facility
- Very low drift
Applications
- Cryogenic probes to measure remanent megnetisation inside RF cavities in particle accelerators
- Field uniformity measurements during manufacture of electro and superconducting magnets
- Compass safe distance testing during EMC tests
These compact, high performance fluxgate sensors with integral electronics provide precision measurements of static and alternating magnetic fields in three axes. They are available in a variety of enclosures. Powered from any ±12V supply, outputs are in the form of three analogue voltages from 0 to ±10V, proportional to Bx, By and Bz.
Features
- Cylindrical, square section, unpackaged and two-part
- Noise levels down to <6pTrms/√Hz at 1Hz
- Measuring ranges from ±70μT to ±1000μT
- Bandwidth to 3kHz
Applications
- Magnetic field monitoring
- Use as feedback sensors in active magnetic field shielding systems
- Site surveys prior to MRI or Electron Microscope installation
- Electromagnetic surveys
- Aeromagnetic surveys
- Magnetic signature ranges
The RT-1 is a high sensitivity, portable, hand-held magnetic susceptibility meter with digital and analogue display. It can store over 9800 readings, and display immediate and stored readings as SI or CGS.
Features
- Sensitivity down to 1×10-5
- Backlit LCD display for analogue and digital readings
- Memory capacity >9800 readings and flags
- Up to 50 hours of continuous use on one battery charge
Applications
- Geological mapping in mineral & petroleum exploration industries
- Core logging via application of volumetric correction factor for drill-core
- Follow-up magnetic surveys
- Laboratory measurements
These low noise fluxgate magnetometers are designed specifically to meet the exacting environmental requirementsof aerospace applications.These magnetometers have two-part construction, consisting of a sensor head assembly and an electronics board
Features
- Designed to MIL-STD-810 (vibration and shock) and MIL-STD-202 (thermal shock) for integration into airborne platforms.
- ±75μT full-scale range
- -55ºC to +55ºC continuous operating temperature range
- Low noise: <8pTrms/√Hz at 1Hz (Mag628/629), <4pTrms/√Hz at 1Hz (Mag669)
- Concurrent sensing axes
Applications
- Magnetic Anomaly Detection
- Navigation
- Vector compensation in airborne magnetometry
The BSS-02B is a borehole probe for measurement of magnetic susceptibility from 10-5 to 10-1 cgs. It is calibrated for use in 50mm diameter boreholes at temperatures up to +90°C, and it is able to operate at depths of up to 6000 metres over a temperature range of ambient to +120°C.
Features
- Wide measuring range: 10-5 to 10-1 cgs
- Low operating frequency: 1.36kHz
- Stratigraphic resolution of 25mm
- Operates to pressures of 10,000 psi maximum
- Operates to temperatures of 120ºC: calibrated to 90ºC
- Frequency up to 21 readings per second
- Low temperature induced drift: <20 x 10-5 cgs over the calibrated temperature range ambient to 90ºC
- Calibration sample supplied
Applications
- Mineral prospecting, including discrimination of kimberlites, iron ore and uranium ore
- Stratigraphic correlation
- Delineation Of Alteration Fronts
- Delineation of strata of economic interest and evaluation of the ore’s grade